How to reduce the cost of lithography
Time:2022-11-25
Views:1812
Due to the limited quantity and specifications of some products, it is often necessary to use small size paper for printing. It is completely unnecessary to make a corresponding size of the printing format of the shading plate, because there are old plates can be used. Some printing houses often cut the 8-base plate into 9-open or 12-open, or even smaller format for printing. Although this is a good deal for a while, can save the trouble of making a new edition, but the old small plate can not be printed in the large plate, had to make a new plate of the large plate. Therefore, the use of "plate cutting method" to achieve large layout printing small format, will make the production cost increase, cause unnecessary economic waste.
In view of this situation, through in-depth exploration and practice, the traditional production mode has been changed, and the printing technology of "big plate and small print" has been innovated and improved, which can not only keep the old shading plate specifications unchanged, but also effectively save money. When the format of the transfer is smaller than the original specification, the necessary "strain" measures can be used to make the excess layout not stained with ink, nor contact with the packaging lining, to ensure normal printing, receive good printing effect.
Over the years, the printing method of "big plate and small print" without cutting plate has been adopted to print all kinds of general background plates, which has saved the time of plate making, shortened the production cycle, and significantly improved the production efficiency and economic benefits.
In view of this situation, through in-depth exploration and practice, the traditional production mode has been changed, and the printing technology of "big plate and small print" has been innovated and improved, which can not only keep the old shading plate specifications unchanged, but also effectively save money. When the format of the transfer is smaller than the original specification, the necessary "strain" measures can be used to make the excess layout not stained with ink, nor contact with the packaging lining, to ensure normal printing, receive good printing effect.
Over the years, the printing method of "big plate and small print" without cutting plate has been adopted to print all kinds of general background plates, which has saved the time of plate making, shortened the production cycle, and significantly improved the production efficiency and economic benefits.
ChatNow
Mail me
Anna Zhang